Hey guys, I was wondering if you all could give us an update as who designed what bullet molds for the 44 cal. bullets. I'd like to update the 44-40 website. Still missing some old ones and there have been some new ones added like Ed's 43-206H
-
43-200L -
-
43-200Q (Heeled) - by Ed Harris, for rifles with large large groove diameters and small chamber
-
Bullet Blog Post - Over-sized Bullet for Over Sizes Bores, Original Winchester 73' Bores.
-
-
43-200QL (Heeled)- by Ed Harris, aka Outpost75, same as 43-200Q but with large lube groove for black powder
-
43-205C - Large lube groove for Black Powder
-
43-205D -
-
43-205DT -
-
43-205M - by Mark Whyte aka Springfiled Slim Website
- 43-206H - Ed Harris, aka Outpost75
-
43-208A (Heeled) - by Bryan Austin aka Savvy Jack. Slightly heeled at .427 with an exposed driving band of .429
-
43-210B - by aka Fairshake aka Cajun Shooter, same profile as the Lyman 427098.
-
43-210G -
-
43-214A - by Bryan Austin, Replicates the nose of the 43-215C minus the crimp grove and replicates the body of the 427098, for smokeless or black powder. Achieved 30/40 shot 4" groups @ 100 yards using Reloder 7.
-
43-215C - by John Kort aka w44wcf aka w30wcf, replicates the 427098 but adds a large lube groove for black powder, crimp groove. Achieved 30 shot 4" groups at 100 yards with black powder.
-
43-215CB -
-
43-220C -
-
43-225D - Ed Harris, aka Outpost75 (44 Magnum Frame 44-40 Revolvers)
-
43-230E -
-
43-230EB - Ed Harris
-
43-230G - Ed Harris, aka Outpost75
Feel free to add any not included.
44-40 Website - https://sites.google.com/view/44winchester/chasing-the-44-40