NOE Molds On Ebay

  • 324 Views
  • Last Post 06 July 2019
mashburn posted this 04 July 2019

If you haven't been on ebay in the bullet mold section you're in for a big surprise when you do.

The first 102 pages or so are all NOE diagrams of their molds. BIG STUPID MISTAKE ON MY PART. IT WAS GUNBROKER INSTEAD OF EBAY. I WAS THINKING GUNBROKER AND TYPED EBAY. I'M SO SORRY.

Mashburn

David a. Cogburn

Attached Files

Order By: Standard | Newest | Votes
David Reiss posted this 04 July 2019

Don't buy NOE molds on Gunbroker or Ebay. He uses a third party seller to sell them on these sights. They are the same price as on the NOE website, but NOE makes less money on sales from Gunbroker and Ebay. So please buy direct from NOE so all the money goes to NOE.

David Reiss - NRA Life Member & PSC Range Member Retired Police Firearms Instructor/Armorer
-Services: Wars Fought, Uprisings Quelled, Bars Emptied, Revolutions Started, Tigers Tamed, Assassinations Plotted, Women Seduced, Governments Run, Gun Appraisals, Lost Treasure Found.
- Also deal in: Land, Banjos, Nails, Firearms, Manure, Fly Swatters, Used Cars, Whisky, Racing Forms, Rare Antiquities, Lead, Used Keyboard Keys, Good Dogs, Pith Helmets & Zulu Headdresses. .

Attached Files

  • Liked by
  • John Carlson
  • M3 Mitch
Ross Smith posted this 05 July 2019

I've seen a few that were overpriced also.

Attached Files

mashburn posted this 05 July 2019

Hello David,

I was on the mold part of ebay about two weeks ago and didn't see this at that time. Last night after getting Ed's response, I got on ebay to look for the RCBS mold that he mentioned and found all of the NOE molds.Thanks for letting me know that these are posted by a jobber and not NOE. The .17 cast lead project is not dead, I've just been unable physically to do anything for a while up until the last week. I couldn't even type without severe pain. I'm much better now and am back in the shop some. I'm planning on going ahead and powder coat the .17 cal. bullets when I get to rolling again. The nose section of the bullet that comes out of your NOE mold is much smaller that the bore of my .17 barrel. I don't know how that is going to work.The barrel on my completed rifle is a Sako.  Ihave another unfinished .17 rifle that is barreled with a Shilen  barrel. I haven't checked the bore diameter on it as of yet. I keep saying that I'm going to call you about the computer and your rifle project but like I said, I've been past doing anything besides going to Grand kids summer basketball games. They both play AAU basketball and play in their respective schools summer programs. My Grandson who will be a senior  this year, he along with three other of his AAU teammates got invited to Hot Springs, Arkansas tomorrow morning for a college basketball scholarship tryout. I've got my fingers crossed and am praying to the good Lord.

Thanks,

David Cogburn

Mashburn

David a. Cogburn

Attached Files

  • Liked by
  • M3 Mitch
Notlwonk posted this 05 July 2019

102? I'm only finding 5 NOE molds.

Attached Files

mashburn posted this 05 July 2019

Hello Notlwonk,

My big stupid mistake, it was gunbroker instead of ebay. I'm sorry. I was thinking gunbroker but typed ebay.

Mashburn

David a. Cogburn

Attached Files

gpidaho posted this 05 July 2019

David:  Wishing your grandson good luck. Gp

Attached Files

Notlwonk posted this 05 July 2019

No harm done, I should have checked GB.

Attached Files

Coydog posted this 05 July 2019

I go to NOE ,I call him up and make my order and know it is done. I know I will get what he have in stock. 

Attached Files

mashburn posted this 06 July 2019

Hello Coydog,

I do the same. He is a very nice man to deal with and I've been happy with every purchase that I have made from him.

Thanks for your input,

Mashburn

David a. Cogburn

Attached Files

Close