Recommended filler for leather bench rest bag

  • 3.4K Views
  • Last Post 13 November 2023
  • Topic Is Solved
David R. posted this 23 September 2017

I recently purchased a leather front bench rest bag from Brownells. I was wondering what filler folks recommended. Lead shot, sand, rice? Thanx, 

Attached Files

Order By: Standard | Newest | Votes
45 2.1 posted this 23 September 2017

All you listed have been used............. but currently most people are using plastic airsoft BB's.

Attached Files

  • Liked by
  • David R.
John Alexander posted this 23 September 2017

A lot of the jacketed benchrest shooters use some kind of very dense heavy sand and stuff them so full that they are more like a piece of cast iron than a sand bag.  Since mine seem heavy enough to carry back and fourth I have always use plain old clean and that seemed OK.  Since rice of air soft balls would be much lighter, maybe I should try them.

John

Attached Files

  • Liked by
  • David R.
  • 2frogs
R. Dupraz posted this 23 September 2017

(b)      Sandbags – Shall be of one or more materials which can be easily flexed with the fingers before being filled with a non-metallic material similar to dry sand.

Fine dry sand works for me 

Attached Files

onondaga posted this 24 September 2017

I recommend what I use. From Harbor Freight, #12 grit Walnut shell media. I use it in my vibratory cleaner too. Source:

https://www.harborfreight.com/25-lbs-coarse-grade-walnut-shell-blast-media-92150.html

 

Gary

Attached Files

  • Liked by
  • David R.
4and1 posted this 24 September 2017

Most agree too hard is bad. Also, too soft and it kind of ruins the reason for a steady rest in the first place. I use plain jane play sand, but putting the right amount in makes a difference. You want the bag to hold its shape and not slump. Make a forming plate to keep the bag in shape when the gun isn't in it, the same size as your forend. Maybe at the start of every shooting session, just give it a bit of fluffing to keep it from getting too hard. The rear bag should get the same treatment. It has to have enough sand to keep its shape, the ears need to conform somewhat to the butt. But not too hard.

Attached Files

  • Liked by
  • David R.
.22-10-45 posted this 24 September 2017

I too like the heavy sand...but only for rear bags.  In front, I use clean sand.  The heavy sand is finer than regular sand and can filter out of bag seams..didn't want sand gunking up threads in front rest.

Attached Files

  • Liked by
  • David R.
John Alexander posted this 24 September 2017

There is obviously more than one way to skin a cat although some people think they know the only one. I shot with some top jacketed bullet benchrest score shooters for several years. As mentioned above their bags could just as well been made of concrete with a leather cover.  "Bag Squeezers" was not a complimentary term -- but occasionally a bag squeezer with a soft bag would beat them anyway.

John 

Attached Files

  • Liked by
  • David R.
David R. posted this 24 September 2017

I'm mostly a rifle ignoramus, but wanting to learn. I don't actually like shooting at a bench very much, but that may be because I don't really know what I'm doing. I figured that I need to learn if I want to get my rifle(s) to perform well and be able to see what sort of groups that they are capable of. Not being a sophisticated bench rest shooter I just want something that doesn't feel like ship's ballast to carry, but does the trick. The walnut shell suggestion sounds good. I need to get some of that stuff anyway for my motorcycle projects. 

Attached Files

lotech posted this 24 September 2017

Hard to imagine a better sandbag filler than sand. Also, it seem that an overfilled sand bag , regardless of filler, with no "give" would prove a disadvantage in most, if not all situations. 

Attached Files

  • Liked by
  • David R.
Tom Acheson posted this 24 September 2017

From the FWIW dept.....

"Regular" beach-like sand (dry) has an average bulk density of about 100 PCF (pounds per cubic foot) and the heavy sand is probably zircon sand at about 170 PCF. Some foundrys like the zircon version because it gives a better finish on the casting (and possibly other reasons) but it is more expensive.

Try packing the sand loose, firm and compacted, shoot a separate target with each condition and let your targets tell you which works best.

Might want to check the CBA benchrest match rules and see if the need for the "sand" bag to be playable with finger pressure is mentioned. Now there's a subjective thought!

 

Tom

 

Attached Files

  • Liked by
  • David R.
  • Ross Smith
OU812 posted this 25 September 2017

What type front sand bag rest are we talking about...there are several.

Attached Files

Ed Harris posted this 25 September 2017

I use spent ground corncob case tumbling media.

73 de KE4SKY In Home Mix We Trust From the Home of Ed's Red in "Almost Heaven" West Virginia

Attached Files

  • Liked by
  • David R.
Ken T posted this 25 September 2017

I use heavy sand from Sinclair in both front and rear bags.

Attached Files

Goatwhiskers posted this 26 September 2017

I prefer sand, filled to a moderate firmness.  Having said that, kitty litter works well and is lighter.  GW

Attached Files

David R. posted this 26 September 2017

What type front sand bag rest are we talking about...there are several.

#7 Standard Front Bench Rest bag from Brownells. 

I was curious what folks were using because it doesn't look easy to get it in and a lot harder to get it back out if I don't like it. The corn cob and kitty litter suggestions are topping the list so far. Competition rules hadn't entered my mind. So much to learn! 

Attached Files

Ken T posted this 26 September 2017

It can be a bit of a nuisance to fill and empty the bags.Before you fill the bag with some light weight material maybe try one of the cheap prefilled bags from Walmart to see if you like the light weight bag.I prefer a bag that stays where I set it.

Attached Files

  • Liked by
  • David R.
oscarflytyer posted this 04 October 2017

I use double bagged wool socks and stuff them very full/tight with corn cob media.  Easy to mold, beat around and get the shape I want and much less dust.  And nowhere as heavy as sand.  I have not tried it in a leather bag.  For that, sand is probably better.

Attached Files

  • Liked by
  • David R.
Robert35 posted this 30 March 2019

I am new to the shooting and recently got a new rest bag from discounted coupons. I am also confused about what to fill in it, i guess sands would be the best option. 
I am wondering what experts suggests us.
Any experts here?

Attached Files

Scearcy posted this 30 March 2019

If you are going to shoot in an matches, you should consider sand. I use the fine stuff that comes in 40# bags from Home Depot. If no matches are in your future something lighter might serve nicely. 

I have used corn or rice in the past and they both absorb moisture. I don't use them any more.

Jim

Attached Files

BigMan54 posted this 31 March 2019

My sand bags are still filled with sand from Redondo Beach. I cut the head off a .30-06 case and taped it to a funnel and walked across the street. Got some strange looks from people passing by on the bike path.

Had a friend that filled his with shot. They split open the first time he used them. I don't recommend shot. 

Long time Caster/Reloader, Getting back into it after almost 10yrs. Life Member NRA 40+yrs, Life S.A.S.S. #375. Does this mean a description of me as a fumble-fingered knuckle-draggin' baboon. I also drool in my sleep. I firmly believe that true happiness is a warm gun. Did I mention how much I HATE auto-correct on this blasted tablet.

Attached Files

Show More Posts
Close