| Topic |
Replies |
Views |
Started by |
Last Post  |
 |
Lyman 311410 bullet mould
Lyman 311410, flat base Hollow Point conversion |
1 |
221 |
low$John |
Wed Nov 18th, 2009 07:39 pm
by Johnny Breedlove  |
|
Ladle or Bottom Pour???
|
13 |
190 |
Vassal |
Wed Nov 18th, 2009 08:28 am
by Dew |
|
Dirty bullets
Artical in May June FS. |
5 |
119 |
Johnny Breedlove |
Wed Nov 18th, 2009 04:25 am
by Johnny Breedlove |
 |
Cast Bullet Boxes
|
19 |
1,067 |
Stephen Perry |
Tue Nov 17th, 2009 10:13 pm
by Fg1 |
|
Saeco 315
|
4 |
800 |
Lefty |
Sun Nov 15th, 2009 08:07 pm
by Suo Gan |
|
Low velocity .25 caliber loads Page: 1 2
|
24 |
1,836 |
KenK |
Sat Nov 14th, 2009 05:13 pm
by 99 Strajght |
 |
steyr 450 marlin big bore rifling twist
|
14 |
366 |
canuck4570 |
Tue Nov 10th, 2009 12:00 am
by hunterspistol |
 |
Any commercial "custom" bullet casters out there?
Looking for a source of low-volume, custom cast bullets |
0 |
82 |
Tom in Pittsburgh |
Mon Nov 9th, 2009 02:12 am
by Tom in Pittsburgh |
|
Full House Loads and High velocity!!!! Page: 1 2
|
27 |
1,075 |
Vassal |
Sun Nov 8th, 2009 01:32 am
by Tazman1602 |
|
Bullet dia.
Bullet dia. vs. groove dia. |
2 |
130 |
hmeier4799 |
Fri Oct 30th, 2009 06:22 pm
by tturner53 |
|
Plain Based/Gas Check Question Military Loads CE Harris Work
|
15 |
700 |
kokojoe |
Tue Oct 27th, 2009 10:49 pm
by linoww |
|
Cast Bullet Load for TC
Load for 7MM TCU |
3 |
209 |
Johnny Breedlove |
Tue Oct 27th, 2009 05:28 am
by Johnny Breedlove |
|
How fast can a gas checked bullet go?
357 mag 164gr LSWCGC out of an 1894C |
8 |
413 |
fourdollarbill |
Mon Oct 26th, 2009 04:06 pm
by runfiverun |
|
Which Lee mold is best?
|
7 |
532 |
sirgknight |
Fri Oct 23rd, 2009 01:59 pm
by 99 Strajght |
|
Lyman 311299
|
7 |
425 |
Stephen Perry |
Tue Oct 13th, 2009 03:23 pm
by beltfed |
|
Bullet casting session
RCBS 180 GC RFN and Lyman 131 bevel base |
1 |
139 |
Johnny Breedlove |
Tue Sep 29th, 2009 06:10 am
by tturner53 |
|
cast bullets for Hunting Page: 1 2
what alloy to use and bullet design |
27 |
1,424 |
buffalord |
Wed Sep 23rd, 2009 11:15 pm
by Dale53 |
|
small hollow based wadcutter for 45 colt
|
3 |
383 |
detshiva |
Tue Sep 15th, 2009 10:24 pm
by Dale53 |
|
Bullet Sizing Page: 1 2
|
22 |
1,400 |
Stephen Perry |
Wed Sep 2nd, 2009 02:35 am
by Stephen Perry |
|
m die for 300 sav.
|
2 |
128 |
buffalord |
Tue Sep 1st, 2009 02:54 am
by buffalord |
|
41 cal
keith swc's |
1 |
187 |
n-frame |
Tue Sep 1st, 2009 01:36 am
by anachronism |
|
Bump/taper die set up
|
11 |
365 |
KenK |
Mon Aug 31st, 2009 01:49 pm
by Jeff Bowles |
|
First shot accuracy
|
7 |
809 |
KenK |
Mon Aug 24th, 2009 01:17 am
by Dollar Bill |
|
222 Remington
Does anyone have experience with the 222 and cast bullets |
10 |
1,583 |
Lefty |
Sun Aug 23rd, 2009 09:26 pm
by Stephen Perry |
|
"M1 Carbine" "accuracy loads"?
|
13 |
1,783 |
NuJudge |
Sun Aug 23rd, 2009 07:04 pm
by Stephen Perry |
|
CHAMBER, THROAT, LEAD, BALL SEAT ETC.
|
2 |
883 |
Joe Brennan |
Fri Aug 21st, 2009 05:34 pm
by Stephen Perry |
|
Loading Cast Bullets vs Jacketed
|
9 |
734 |
CzechM8 |
Thu Aug 6th, 2009 08:53 am
by Stephen Perry |
|
Ruffles Without Ridges
|
2 |
261 |
Stephen Perry |
Sun Aug 2nd, 2009 07:26 pm
by hunterspistol |
|
Wad material
|
4 |
275 |
Notlwonk |
Sun Aug 2nd, 2009 04:58 pm
by Notlwonk |
|
Bullet Strength vs. Pressure--LASC Article and Lee Book in Contradiction?
Does chamber pressure dictate min or max alloy strength? |
10 |
553 |
calinb |
Sun Aug 2nd, 2009 01:31 am
by cityboy |
|
10MM moulds
|
1 |
220 |
Dew |
Wed Jul 29th, 2009 01:04 am
by excess650 |
|
Optium powder(s) for cast bullets
|
15 |
1,298 |
Jack |
Tue Jul 28th, 2009 02:22 am
by Stephen Perry |
|
lino lead when can not be found
What to use in its place |
16 |
813 |
Coydog |
Mon Jul 27th, 2009 02:30 pm
by Duane Mellenbruch |
|
cast 22cal bullets
|
11 |
594 |
Coydog |
Thu Jul 23rd, 2009 01:31 am
by linoww |
|
Will California Outlaw Lead Wheel Weights?
a bill has already passed the senate |
8 |
706 |
Mike Mandaville |
Mon Jul 20th, 2009 07:54 pm
by canalupo |
|
INTIMATE SECRETS OF THE LYMAN 450 LUBRISIZER Page: 1 2
|
21 |
4,288 |
Joe Brennan |
Mon Jul 20th, 2009 02:54 am
by hunterspistol |
|
steyr 450 marlin big bore...
|
0 |
264 |
canuck4570 |
Mon Jul 13th, 2009 01:21 am
by canuck4570 |
|
Casting Small Diameter Rifle Bullets
|
9 |
1,458 |
Stephen Perry |
Mon Jul 13th, 2009 01:15 am
by Coydog |
|
Lyman 311410 Mold
|
4 |
428 |
Stephen Perry |
Sun Jul 12th, 2009 04:53 pm
by Stephen Perry |
|
Battery Smelting
Has anyone here done this? |
13 |
820 |
Mike Mandaville |
Fri Jul 10th, 2009 05:14 pm
by BerdanIII |
Current time is 01:55 am
|
XML
|
Page: 1 2 3 4 5 6  |
