| Topic |
Replies |
Views |
Started by |
Last Post  |
 |
1847 Colt Walker rounds
|
6 |
157 |
miracleman 2001 |
Wed Nov 18th, 2009 03:25 pm
by Ed Harris  |
|
Casting Session
22 cal. and 7mm cal. |
11 |
190 |
Johnny Breedlove |
Tue Nov 17th, 2009 05:55 pm
by Johnny Breedlove |
 |
Casting for 7x57
|
15 |
491 |
BigDaddie |
Mon Nov 16th, 2009 07:08 pm
by shastaboat |
|
Bullets over weigh and oversized
|
11 |
301 |
drew212 |
Mon Nov 16th, 2009 06:44 pm
by Dollar Bill |
|
bullet mold diameter?
|
7 |
368 |
MOGWAR |
Sun Nov 15th, 2009 09:35 pm
by Johnny Breedlove |
 |
Heating in kitchen oven?
Is it sage? |
4 |
163 |
grayowl |
Wed Nov 11th, 2009 02:16 am
by corerf |
 |
Casting for a .357.Sig
|
6 |
366 |
Dew |
Mon Nov 9th, 2009 06:56 pm
by Dicko |
|
Heat Treating bullets to increase BHN
|
15 |
402 |
billwnr |
Mon Nov 9th, 2009 06:31 pm
by Dicko |
|
Lapping molds
|
2 |
99 |
Don Fischer |
Mon Nov 9th, 2009 06:21 pm
by Dicko |
|
Silver bullets
|
17 |
758 |
devin1955 |
Mon Nov 9th, 2009 04:35 pm
by me |
|
Dross, Flux, and Alloys
|
13 |
529 |
Gene |
Sat Nov 7th, 2009 12:06 pm
by Gene |
|
Casting Ingots - Melting Down Spent Rounds From Berm
|
8 |
633 |
mncorrado |
Sat Nov 7th, 2009 08:11 am
by Dicko |
|
casting and what not.
|
5 |
350 |
Seabee |
Thu Nov 5th, 2009 06:18 pm
by Dicko |
|
Lee Pro 4-20 Melter
|
15 |
1,356 |
miestro_jerry |
Thu Nov 5th, 2009 05:58 pm
by Dicko |
|
Signs of zinc contamination
|
3 |
346 |
LuvSkye |
Wed Nov 4th, 2009 12:55 pm
by Dicko |
|
wrinkled bullets
Why are my rifle bullets just right, and my 45's all wrinkly? |
5 |
210 |
GrumpyOldSwede |
Sun Nov 1st, 2009 03:05 pm
by Dollar Bill |
|
Lyman Single and Double Molds
|
2 |
250 |
Stephen Perry |
Sun Sep 27th, 2009 03:14 am
by Stephen Perry |
|
Cast Bullets for 223 Rem VSSF II rifle
|
5 |
406 |
aap2 |
Sat Sep 26th, 2009 04:23 pm
by Stephen Perry |
|
Copper Bullets
How do I figure the weigh of copper Bullets |
10 |
634 |
SAMUEL.DEAN |
Wed Sep 23rd, 2009 07:57 pm
by LWesthoff |
|
Kano Kroil as a release agent
|
10 |
884 |
Jeff Bowles |
Sat Sep 19th, 2009 04:11 am
by lordgroom |
|
COLORED BULLETS
|
9 |
731 |
sart256 |
Sat Sep 19th, 2009 02:31 am
by tturner53 |
|
Hardness testers for ingots and bullets ?
Tester manufacturers ? |
11 |
789 |
murray222 |
Mon Sep 7th, 2009 04:54 pm
by applejack |
|
Strange problem smelting
|
17 |
908 |
amb1935 |
Thu Sep 3rd, 2009 06:46 pm
by n5638b |
|
what happened to Penny's Casting in Topanga Ca.
What happened to Penny's Casting in Topanga Ca. |
4 |
434 |
steve b. |
Thu Sep 3rd, 2009 02:54 am
by 3100Loren |
|
lessons learned.
|
19 |
1,002 |
Seabee |
Sat Aug 15th, 2009 04:28 pm
by Seabee |
|
Size or not - out or round tolerance?
|
3 |
757 |
kokojoe |
Sun Aug 9th, 2009 10:00 pm
by X-Wrench3 |
|
Fluxing
Bullet Casting |
7 |
910 |
milcol |
Sat Aug 8th, 2009 05:29 am
by klw |
|
Best Bullet mould for 223 rem 1:12 twist Rem VVSF Page: 1 2
Bullet mould |
23 |
2,155 |
aap2 |
Tue Aug 4th, 2009 09:19 am
by Stephen Perry |
|
I still need some help and here is a pic for you...
|
16 |
665 |
Stimp |
Thu Jul 30th, 2009 08:35 pm
by Seabee |
|
I need some help with my casting.
Problems filling molds completely |
14 |
504 |
Stimp |
Wed Jul 29th, 2009 04:02 am
by Stimp |
|
.223 Ruger Ranch rifle
cant hit the paper! |
4 |
482 |
Sodbust |
Mon Jul 27th, 2009 03:34 am
by leadburner |
|
casting the 223
|
2 |
349 |
breakallthebirds |
Sun Jul 26th, 2009 09:02 pm
by Stephen Perry |
|
Any casters in the albuquerque area?
|
0 |
146 |
lifeon2 |
Tue Jul 14th, 2009 04:50 am
by lifeon2 |
|
temp control
melting pot |
3 |
467 |
WILDCATT |
Mon Jul 13th, 2009 12:10 pm
by Jeff Bowles |
|
TYPE METAL what is it?
|
9 |
540 |
mike morrison |
Thu Jul 9th, 2009 02:00 am
by cityboy |
|
Question
|
9 |
500 |
oscar1975 |
Sun Jul 5th, 2009 11:41 pm
by giorgio de galleani |
|
Soft Points?
|
3 |
250 |
Joshua M. Smith |
Sun Jul 5th, 2009 07:11 pm
by Joshua M. Smith |
|
New At This - Need suggestions
|
11 |
625 |
bullet |
Tue Jun 30th, 2009 05:50 pm
by captain-03 |
|
Casting Problems
New to casting and my bullets are coming out cracking, etc....... |
17 |
1,332 |
bhlua |
Wed Jun 17th, 2009 06:28 pm
by mikld |
|
bullet for .22 Maynard Long
Cast bullet and alloy for this cartridge |
4 |
366 |
Edward |
Sat Jun 13th, 2009 05:39 pm
by hunterspistol |
Current time is 11:43 pm
|
XML
|
Page: 1 2 3  |
