Hi all... Just started casting with LBT molds. I'm loading Veral's .44 cal 260gr wfn bullet over Alliant 2400. Anyone load his bullets before? What would be a good start point and max charge?
LBT .44 magnum data
- 1.5K Views
- Last Post 25 June 2017
Start at 16 gr Alliant 2400 and work up to 20.0 gr. At 20 gr in Winchester cases using a Fed 150 primer under a 265 gr cast I measured the psi right at the SAAMI MAP (35k psi).
LMG
Concealment is not cover.........
Attached Files
Larry,
Those are GREAT LOADS. I use 20grs of 2400 behind a SAECO #432 - 265GR FPGK for a heavy load down to 15grs of 2400 for a lighter load.
Long time Caster/Reloader, Getting back into it after almost 10yrs. Life Member NRA 40+yrs, Life S.A.S.S. #375. Does this mean a description of me as a fumble-fingered knuckle-draggin' baboon. I also drool in my sleep. I firmly believe that true happiness is a warm gun. Did I mention how much I HATE auto-correct on this blasted tablet.
Attached Files
20 gr of 2400 would be a good maximum to work up to with your LBT bullet. 2400 always worked best for me at maximum loads. Light loads of 2400 may leave unburned kernels which can tie up a DA revolver, not a problem with a SA. If i want a bit less velocity 12.0 gr Power Pistol gives 1250 fps and 9.0 gr gives 1000 fps with 250 gr #429421, excellent accuracy and clean burning. I have probably shot 9 moderate magnum loads for every full house load.
Steve
Attached Files
All good advice. I use 16 grs. of Alliant #2400 with the similar Saeco #430 in my Marlin 1894S in .44 Magnum and also in a Beretta Model 412 folding shotgun for which I had John Taylor make a 26" .44 Magnum barrel. I've seen no need for a heavier load, because there is nothing here big enough to eat 'cha.
For a lighter .44 Magnum revolver load which gives good field performance, but with lighter recoil more like a heavy .45 Colt load, I really like 7 grains of Bullseye with any bullet from 200-270 grains. K.I.S.S. principle.
73 de KE4SKY In Home Mix We Trust From the Home of Ed's Red in "Almost Heaven" West Virginia
Attached Files
Categories
- All Categories
- General Polls
- Contact Us w/ Forum Issues
- Welcome to The Cast Bullet Association Forum
- General
- Bullet Casting
-
Guns and Shooting
- AR Platform
- TC Contenders & Other Single Shot Handguns
- Shotguns
- Informal Matches & Other Shooting Events
- Gunsmithing Tips
- Gun Cleaning & Maintenance
- Optics
- Benchrest Cast Bullet Shooting
- Military Bench Rest Cast Bullet Shooting
- Silhouette Shooting
- Postal Match Cast Bullet Shooting
- Factory Guns
- Black Powder Cartridge
- Hand Guns
- Lever Guns
- Single Shot Rifles
- Bolt Action Rifles
- Military Surplus Rifles
- Plinkers Hollow
- Muzzleloaders
- Hunting
- Reloading
- Buy, Sell or Trade
- Other Information & Reference
Search
This Weeks High Earners
- linoww 12
- Aaron 10
- John Carlson 4
- fc60 2
- John Alexander 2
- Wilderness 2
- 2frogs 1
- .22-10-45 1
- Wm Cook 1